The procedure entry point could not be located in the dynamic link library

Fixed: The Procedure Entry Point Could Not Be Located

Recently, some Windows 10 users complain about the error “the procedure entry point could not be located in the dynamic link library”. To get rid of this issue, you can keep reading this article from MiniTool Software to get several feasible solutions.

“The procedure entry point could not be located in the dynamic link library” is an error message that might appear when you are trying to open a certain program or install a driver on your computer. This error comes up with Entry Point Not Found notification dialog and points out the problematic DLL file, just as the following screenshot shows.

This error occurs because the program or driver fails to locate a specific DLL file. It is possible that the DLL file gets missing, corrupted or is not in a directory specified in the path. As for the root causes, it might be hard to figure out. But luckily, you can try the following methods to fix it by yourself.

Fix 1: Use Windows Defender Antivirus

As we all know, virus or malware might maliciously alter your data including the DLL files. So, the first thing you should do is to make a full scan for your system to remove any virus/malware threats. To do that, you can use the built-in Windows Defender antivirus.

Step 1: Press Windows + I to open Windows Settings.

Step 2: Go to Update & Security > Windows Security and click Virus & threat protection in the right pane to open Windows Defender Security Center.

Step 3: Click Run a new advanced scan.

Step 4: Choose Full scan option and click Scan now button to start the scanning process.

After that, you can relaunch your program to check if “procedure entry point could not be located” issue is fixed. If it still exits, just move on to the next fix.

Fix 2: Reinstall the Problematic Program

It is also said that the needed DLL file might have been corrupted during the installation of the program. In this case, you can get a new DLL file from another computer which runs the same operating system as yours. If this doesn’t help, you might need to uninstall the program, and then download the latest version from the official site and reinstall it.

Fix 3: Use System File Checker Tool

DLL file is a kind of system files. So, if you get certain problems related such files, you can try using the System File Checker tool alternatively. This tool will scan all your system files and automatically repair the corrupted ones with a cached copy. The steps are displayed below:

Step 1: Press Windows logo and R key at the same time to invoke Run dialog.

Step 2: Input cmd in the editable box and press Ctrl + Shift + Enter to open Command Prompt as administrator.

Step 3: Type sfc /scannow command and press Enter.

Then, this tool will start scanning your system and this will take some time. Once it has repaired the corrupted files, you need to restart your computer and check if you can launch your problem smoothly.

Fix 4: Re-Register the DLL File

As the DLL file is the direct factor which leads to entry point not found error, you can try re-register the specific file mentioned in the error message. This is a quite simple operation.

Just run Command Prompt as administrator, input the command regsvr32 filename and press Enter.

Note: Filename in the command should be replaced by the name of the specific DLL file pointed in the error message.

After re-registering the DLL file, you can try launching the program or install your driver again.

Fix 5: Perform System Restore

If “the procedure entry point could not be located in dynamic link library” issue occurs suddenly and you can launch the program before, you can try perform system restore to bring your computer back to previous status. To use this solution, you need to make sure you have created a restore point before. If you have created one, just follow the given tutorial below:

Step 1: Type restore in the Search bar and choose Create a restore point from the search results.

Step 2: Click System Restore button under System Protection tab.

Step 3: Skip the welcome page, choose a restore point and click Next button.

Step 4: Confirm the operation in the next interface and click Finish button to execute it.

• facebook
• twitter
• linkedin
• reddit

About The Author

Amanda has been working as English editor for the MiniTool team since she was graduated from university. She enjoys sharing effective solutions and her own experience to help readers fix various issues with computers, dedicated to make their tech life easier and more enjoyable. Amanda has published many articles, covering fields of data recovery, partition management, disk backup, and etc. In order to provide more useful tips and information, she is still committed to expand her technical knowledge.

‘The procedure entry point XXXX could not be located in the dynamic link library XXXX.dll’ message when opening or installing Sage Accounts

If you get this message when installing or opening Sage 50 Accounts, follow this guide to resolve it.

Описание

When installing or opening Sage Accounts, you may receive the following message:

‘The procedure entry point XXXX could not be located in the dynamic link library XXXX.dll’

This message occurs when one of the program files is damaged or the wrong version. Don’t worry, this is easy to resolve in a few simple steps.

Resolution

1. Make a note of the dll file mentioned in the error.
2. If the error also shows a folder path to the dll, make a note of the path.
3. To close the error click OK, then close all software.
4. Press the Windows key + E then either:
   • Browse to the path you noted in step 2, or
   • If there was no path mentioned in the error, browse to the folder you’re installing to
5. Right-click the dll file you noted, click Rename then add old to the filename.
6. Reinstall Sage 50 Accounts.

If the issue persists you may need to uninstall Sage 50 Accounts, install any available Windows updates, then reinstall Sage 50 Accounts to a new folder.

Repair “The Procedure Entry Point Could Not Be Located” Error

Explore the ways you can use to resolve the «Procedure Entry Point Could Not Be Located” error in Windows 10 and get back to your work!

The “Procedure Entry Point Could Not Be Located” error is a Windows 10 error that can be caused by many different things. A few of the most common causes are outdated drivers, missing registry entries and system files, or hardware conflicts.

It’s frustrating when your computer freezes and you’re unable to do anything. It’s even worse when the screen pops up with an error saying “The procedure entry point could not be located in the dynamic link library”. If you’re on Windows 10, this error may seem difficult to resolve. Fortunately, there are a few things you can do to get around the problem.

This article will provide some solutions to the Windows 10 error “The procedure entry point could not be located in the dynamic link library”.

In this post, we’ll explore some ways you can resolve this pesky error and get back to your work!

Table of Contents

• What Causes “The Procedure Entry Point Could Not Be Located in the Dynamic Link Library” Error?
• How To Fix “The Procedure Entry Point Could Not Be Located” in Windows 10
• Method 1. Reinstall the Problematic App
• Method 2. Use the System File Checker
• Method 3. Check the Event Viewer for Errors
• Method 4. Re-Register the DLL File
• Method 5. Scan Your Computer With Windows Defender
• Final Thoughts

What Causes “The Procedure Entry Point Could Not Be Located in the Dynamic Link Library” Error?

This error occurs when software is unable to locate the DLL library it requires to run. It could also happen if the library isn’t located in the path’s provided directory, or if the DLL file is missing or corrupted.

The DLL library is a treasure trove of the most important resources for your computer. It stores and maintains vital system data and drivers that help with compatibility issues between programs on different computers. A missing or corrupted DLL can leave you feeling helpless in cyberspace, as it may prevent everything from opening to crashing completely.

The file containing all these program instructions has gone AWOL at an inconvenient time? Your life might be totally ruined! The symptom could include any number of frustrating things: error messages appearing out of nowhere, files failing to load properly, crashes galore — you name it.

There are many different ways to fix the “The procedure entry point could not be located in the dynamic link library” error. See your options and troubleshooting guides below.

How To Fix “The Procedure Entry Point Could Not Be Located” in Windows 10

Use the following methods to resolve the error «the procedure entry point could not be located» in Windows 10:

Method 1. Reinstall the Problematic App

The first thing you should do when you start troubleshooting is to try reinstalling the application giving you the error. Windows might have removed or corrupted some of the files needed to successfully run it, and reinstalling will help Windows repair any damage that was done.

In Windows 10 you can reinstall programs from Windows Store apps by going to Settings → Apps. Let’s review the step-by-step instructions.

Click on the Windows icon in the bottom left of your screen to bring up the Start menu . Choose Settings , or alternatively use the Windows + I shortcut.

Method 2. Use the System File Checker

The System File Checker (SFC) is a troubleshooting tool available in Windows 10 by default. It’s able to automatically detect corrupted system files, and repair them to working order.

You can use the SFC scan as another way of potentially fixing any problems that lead to “The procedure entry point could not be located in the dynamic link library” errors when you use your computer.

1. Open the search bar in your taskbar by clicking on the magnifying glass icon. You can also bring it up with the Windows + S keyboard shortcut.
2. Type Command Prompt in the search box. When you see it in the results, right-click on it and choose Run as Administrator .

Method 3. Check the Event Viewer for Errors

You are seeing an error message. You probably don’t know what caused it. Use the Event Viewer to easily find out. It’s a built-in tool that shows the last thing that happened on your computer before an application crashed or ran into an error during or after launch.

When something goes wrong with the app or service, it will show up on the Event Viewer and it will help you determine how to fix the problem.

Press the Windows + X keys on your keyboard at the same time, then choose “ Event Viewer ” from the context menu.

Method 4. Re-Register the DLL File

If the error in question mentions a DLL file that your programs need, you should try to re-register it. The Regsvr32 command-line utility can be used for registering OLE controls like DLL and ActiveX (OCX) controls in Windows 10. If you can’t get past the error any other way, you might need to register your DLL files manually.

1. Open the search bar in your taskbar, and then type Command Prompt in the search box. When you see it in the results, right-click on it and choose Run as Administrator .
2. Click Yes if prompted.
3. Type the following command in the new window, and hit the Enter key on your keyboard to execute it: regsvr32 DLL . Make sure to replace “DLL” with the name of the DLL file that was pointed out in the error. Example:

Method 5. Scan Your Computer With Windows Defender

We recommend scanning your computer to make sure that it does not have any viruses. There are some harmful programs that can cause the computer and apps to crash. To scan, we’ll use the Windows Defender built-in program, but a different third-party software may work better.

1. Open the search bar in your taskbar by clicking on the magnifying glass icon. You can also bring it up with the Windows + S keyboard shortcut.
2. Type in Windows Security and launch it from the search results.

Final Thoughts

We hope this article helped you troubleshoot the “The procedure entry point could not be located in the dynamic link library” Windows 10 error. You can now get back up and running as quickly as possible.

Now, it’s your turn.

If you have any questions about how we fixed this and other issues check out our site and contact us . You will get free technical support about any problem in Windows and Office.

Also, check out our Help Center for articles to help you troubleshoot many other Windows 10 errors.

Sign up for our newsletter to get promotions, deals, and discounts from us right in your inbox. Subscribe with your email address below and you’ll be the first one notified about our latest news and deals.

How to Fix Entry Point Not Found Error?

Summary: Entry Point Not Found error occurs when a DLL for a particular app or software goes missing or corrupted. You can fix it by restoring DLL files from the antivirus programs’ quarantined list, running DISM and SFC scans, or following the other methods mentioned in this blog.

• Best Ways to Fix Entry Point Not Found Error
• People Also Ask

Today morning, I tried to open some applications I usually work on. However, every time I do so, a window pops up, saying, ‘The procedure entry point could not be located.’ How do I fix it?

Entry Point Not Found error indicates a missing, deleted, or corrupted DLL file in an app’s or software’s directory. The complete message states: ‘The procedure entry point could not be located in the dynamic link library.’ The error may contain the missing file location, app directory path, or the problematic DLL file name.

Users encounter this error while opening specific applications or programs, like gaming software, photo-video editing apps, Google Chrome, etc. It may also pop up every 10-15 minutes if related to some service/program running in the background.

In any case, the issue is caused due to a missing or corrupted DLL file. Let’s solve this error using the methods shared in this blog.

Best Ways to Fix Entry Point Not Found Error

We’ve shared some tried-and-tested methods to help you fix this error.

#1 Disable your Antivirus

If any antivirus program, be it a third party or Microsoft Windows Defender program, is activated on your system, turn it off and re-run the application/program. Your antivirus program may have blocked some applications’ access to DLL files to keep your system secure. Follow the steps given below to turn off the Windows Defender program.

• Open Settings (Windows + I) and follow Update & Security > Windows Security > Firewall & network protection.

• Choose Private network or Public network on the following prompt and turn off the firewall.

• If you see a prompt message to confirm the action, click Yes to confirm and proceed.
• Once done, close the antivirus window and see if you can run the application now.
• If you still face the error, the required DLL might be missing. Restore the missing DLL with the following method to solve the Entry Point Not Found error.

#2 Restore DLL File from Quarantined Files List

Usually, the DLL files are installed automatically during the application installation process. You don’t need to download them individually. However, antivirus programs sometimes detect DLL files as a threat and block/quarantine or even delete them from the system. As a result, the DLL file needed for the application becomes inaccessible. In such a scenario, you can receive a ‘The procedure entry point could not be located’ error, sometimes indicating a missing Binkw32.dll file whenever, while trying to run that particular application.

If you’ve configured the Microsoft Defender Antivirus to detect and remediate threats on your system, follow the steps to restore the blocked/quarantined files.

• Go to Windows Search, type Security in the search bar, and open Windows Security.

• Now, select Virus & threat protection.

• Open Protection history, and a list of all the recent items will appear on the screen. Filter out the Quarantined items.

• Locate the DLL file and restore it. Finally, reboot your laptop/PC and run the application to see if the issue is solved.

#3 Run DISM and SFC Scan

If there are issues with Windows images and system files, your system and programs installed may not function correctly and throw errors. You can use Windows built-in tools DISM and System File Checker (SFC) to fix such issues. Where DISM will repair the corrupted or damaged Windows images, SFC will replace the damaged or corrupted system files with their correct versions. Follow the given steps:

• Open Search, type CMD, and run it as administrator.
• Now, type DISM /Online /Cleanup-Image /RestoreHealth command and hit Enter.

• Once done, run the sfc/scannow command and press Enter.

• After scanning, close the window and try running the application.

#4 Reinstall Microsoft VC++ Redistributable Package

Reinstalling the Microsoft VC++ Redistributable package is indeed helpful in fixing many DLL files related errors, such as MSVCR71.dll, API-ms-win-crt-runtime-l1-1-0.dll, etc. Since the Entry Point Not Found error is associated with missing or deleted DLL files for a particular application, you can try reinstalling the Microsoft Visual C++ Redistributable Package. Freshly reinstall 2015, 2017, 2019, and 2022 packs for 64-bit Windows systems.

Note: First, uninstall your existing VC package by opening Control Panel and following All Control Panel Items > Programs and Features > VC Package > Uninstall.

Once you’re done uninstalling the existing pack, reinstall the suggested packages with the following steps:

• Visit Microsoft’s official site and freshly download Microsoft VC++ 2015 Redistributable.

• Download the correct file size for your 64-bit system and click Next.

• Run the package, select ‘I agree to the license terms and conditions,’ and click Install.

• Once the package is installed, restart your system, and rerun the application or software to see if the procedure entry point could not be located error is resolved.

#5 Remove Junk Data and fix issues in Windows

Junk files are usually temporary files created on your system to perform specific tasks. However, over time, they become of no use. If not removed, they accumulate on your hard drive, consuming a lot of storage space and eventually causing slow-running PC or other performance-related issues. Sometimes, you may have problems running your application/software. So, removing Junk data from your system is better, and try rerunning the software/app. Follow the below steps:

• Open File Explorer (Windows + E) and then go to This PC > Local Disk (C:).
• Right-click on the Local Disk (C:) and select Properties.

• Now, select Disk Cleanup under the General tab.

• Select the temporary files, thumbnails, and other unwanted data and click OK.

• Once done, restart your system and see if there’s an improvement in your system performance and if you can run programs and applications correctly.

If, after all these methods, you still face the Entry Point Not Found error, you can remove or uninstall the problematic program, application, or software and reinstall it afresh, checking its compatibility with your system. However, uninstalling the application or software will remove all its related data.

Restore your system data, including files, documents, photos, and more, with Stellar Data Recovery.

People Also Ask

1. What is DLL?

DLL stands for Dynamic Link Library. It is also known as a shared library in the UNIX-based OSes. DLL is one of the most useful Windows components you can use to share codes and resources or even shrink the size of your application. The DLL makes it simpler to service and extend the applications.

2. What is the entry point in DLL?

A DLL specifies an entry-point function (optionally). If available, the system calls the entry-point function whenever the thread or process loads or unloads the DLL files. The entry path can perform simple initialization and cleanup tasks.

3. How to create DLL?

Visual Studio IDE can create your DLL written in Microsoft C++ (MSVC). Microsoft has a dedicated walkthrough to help you create and use your Dynamic Link Library. You need to follow the simple steps:

• Create a DLL project in Visual Studio and add the exported variables and functions to the DLL.
• Build the console app, and import the variables and functions from the DLL in the console app.
• Finally, run the completed app.

About The Author

Mansi Verma is a Senior Technology Writer at Stellar®. She is a Tech enthusiast, holding over 8 years of experience in Data Recovery, IoT, Artificial Intelligence, and the Robotics technology domain. She loves researching and providing DIY solutions to solve Windows technical issues. In her spare time, she likes reading novels, and poetry. She also enjoys Travelling, Rafting, Trekking, etc.